Omron CJ Series, Operation Manual

Page: 41 / 415

1-2 Specifications
1-2-2 Files Created by the CX-Integrator
1-13
Files Contents Details
Controller Link node
files (.crg)
Network configuration for Controller Link networks connected directly to the
target PLC
DeviceNet device
parameter files
(.dvf) Parameters for individual DeviceNet devices (master or slave)
Note: These are the same as the DeviceNet device parameter files (.dvf)
created with DeviceNet Configurator version 2. @ . Files created with
DeviceNet Configurator version 2. @ can be imported.
Component
parameter files
CompoWay/F
component
parameter files
(.xml) Parameters for individual CompoNet devices (master or slaves)
Parameters for individual CompoWay/F slaves (except for Temperature
Controllers)
CPU Unit parameters (parts of PLC Setup: serial communications settings)
Controller Link or SYSMAC LINK network parameters
Controller Link and SYSMAC LINK Unit allocated DM Area words settings,
including automatically set data link parameters
Ethernet Unit CPU Bus Unit System Settings
Serial Communications Board/Unit serial communications settings
Controller Link data
link table files (.cl2) Controller Link user-set data link tables
Note: These are the same as the Controller Link data link table files (.cl3)
created with the CX-Net. Files created with the CX-Net can be
imported.
Data link table files
SYSMAC LINK data
link table files (.sl3) SYSMAC LINK user-set data link tables
Note: These are the same as the SYSMAC LINK data link table files (.sl3)
created with the CX-Net. Files created with the CX-Net can be
imported.
FINS local routing
table files (.rtg, .rxg)
(See note 2.) Routing tables of the target PLC
Note 1: These are the same as the FINS local routing table files (.rtg, .rxg)
created with the CX-Net. Files created with the CX-Net can be
imported.
Note 2: Standard number of relay network table entries (20 max.): .rtg
Extended number of relay network table entries (64 max.): .rxg
Routing table files
FINS network
routing table files
(.rt3, .rx3)
(See note 2.) Routing tables for all PLCs on networks to which the target PLC belongs
Note 1: These are the same as the FINS network routing table files
(.rt3, .rx3) created with the CX-Net. Files created with the CX-Net
can be imported.
Note 2: Standard number of relay network table entries (20 max.): .rt3
Extended number of relay network table entries (64 max.): .rx3
Note With DeviceNet only, the following files can also be exported and saved.
EDS files (.eds)
The device list saved in CSV format (.csv)
The I/O comments saved in CSV format (.csv)
The device parameters of an OMRON DeviceNet Master Unit saved as an Open
Network Controller DRM_UNIT (virtual unit) file
The device parameters of an OMRON DeviceNet Master Unit saved as a NetX Server
(NetX Server for DeviceNet) file
Note The CX-Integrator does not support files created in the DeviceNet Configurator Ver.
1.0 file format.