Omron CJ Series, Operation Manual

Page: 162 / 415

3-1 Routing Table Overview
3-1-6 Operating Procedures Prior to Routing Table Transfer
3-9
Creating the FINS Local Routing Tables Offline
Select the destination network and node.
In the Connecting PLC Change Dialog Box, select the Communications
Unit that connects to the network and the node address.
Connect online with the PLC that is directly connected to the CX-Integrator (making it the target PLC).
Select Network – Auto Online or Network – Work Online from the CX-Integrator's menu bar.
Transfer the routing tables to the PLC (from the computer to the target PLC).
Select Options – Transfer to PLC from the PLC routing table menu.
Create the FINS local routing tables (in the PLC routing tables).
Create the local network table.
Create the relay network table.
Save the created routing tables.
Select File – Save Local Routing Table File from the PLC routing table's menu.
Check the routing tables for errors.
Select Options – Check Routing Table for errors from the PLC routing table's menu.
Start the Routing Table Component. (Start the PLC routing tables.)
Select Tools – Start Routing Table from the CX-Integrator's menu bar.
Set the gateway counter. (CS/CJ-series CPU Units must be unit version 3.0 or later.)
Click the SIOU Tab when the PLC routing table is displayed, right-click the local PLC's icon, and select Set Gateway Counter
from the menu.
Update the display in the Online Connection Information Window.
In the Online Connection Information Window, select View – Update of Online Information Window .
Note: Use one of the following PLC models as the PLC
directly connected by serial communications.
•
A CS/CJ-series CPU Unit with unit version 4.0 or later
Transferring to a PLC with a direct serial connection
Transferring to a node in the network through the directly
connected PLC. (See note.)