Omron CJ Series, Operation Manual

Page: 75 / 415

1-5 Window Descriptions
1-5-2 Main Window
1-47
Parts List (Component List)
Components are listed in the Parts List. A component can be added to the network
just by selecting the component in the Parts List and then dragging and dropping it in
the Network Configuration Window. There are lists on the CPS, EDS (DeviceNet), and
DTM (CompoNet) Tab Pages.
CPS Tab
The Parts List shows the OMRON components that have had CPS files installed. The
components are organized by component type in the directory tree format.
A component can be added by selecting the desired component from the Parts List
Pane and then dragging and dropping it in the non-DeviceNet and non-CompoNet
Network Configuration Window.
The following component types are available.
Component type Description
Generic Device These are general-purpose devices such as computers that are not
CPS-compatible.
Human-Machine Interface Contains the supported OMRON NS-series PT models.
PLC Contains the supported OMRON CS/CJ-series PLC (CPU Unit)
models.
Sensor Contains the supported OMRON ZX-series Smart Sensor models.
Temperature Controller Contains the supported OMRON E5
@
-series Temperature Controllers.
Note: The CPS files are installed in the following directory:
Program Files\Common Files\Omron\Profiles\CPSFiles
EDS (DeviceNet) Tab
The Parts List shows components that have had EPS files installed. The components
are organized by both vendor and component type in the directory tree format. A
single device will be displayed in both the vendor and component type directory trees.
Select the device in whichever directory is easier to use.
A component can be added by selecting the desired component from the Parts List
and then dragging and dropping it in the DeviceNet Network Configuration Window.