Omron CJ Series, Operation Manual

Page: 340 / 415

7-6 Editing Master Unit Parameters
7-6-1 Master Unit Parameter Settings
7-19
General Tab Page
Name Function
Communications
Error Input Data
Zero Clear When this option is selected, all input data for the
Slave Unit will be cleared to zeros if a
communications error occurs in the Slave Unit. This
will prevent operation that is triggered by IN data in
Slave Units that have a communication error.
I/O Communication
Manual Startup
Mode When this option is selected, the following will apply.
•
When the Master (PLC) is turned ON, remote I/O
communications will not be started.
•
Remote I/O communications will start when the
Remote I/O Communications Start Switch (setting
parameter bit 00) is turned ON in memory.
Function Choice
Message Disable
Setting When this option is selected, the following functions
will be disabled.
•
Sending explicit messages to Slave Units.
•
Receiving explicit messages from the CPU Unit at
the Master Unit.
Registration
Table Edit Registration
Table When this option is selected, the Registration Table
Tab Page will be displayed.
Software Setting Edit Software
Setting Table When this option is selected, the Software Setting
Table Tab Page will be displayed.
Transfer[Unit to PC] Parameters from components on the network will be
uploaded to the CX-Integrator.
Transfer[PC to Unit] Parameters set with the CX-Integrator will be
downloaded to the components on the network.
Compare Compares the parameters set with the CX-Integrator
with the settings of the component parameters on the
network.