Omron CJ Series, Operation Manual

Page: 86 / 415

1-6 Menus
1-6-2 Pop-up Menus
1-58
DeviceNet Networks
Sub-menu/command Description Offline Online
Wizard Enables setting device parameters with a
wizard (for supported devices only).
OK OK
Edit Enables editing device parameters. OK OK
Load Loads parameters from a device parameter
file.
OK OK
Save Saves device parameters to a file.
OK OK
Upload Uploads device parameters from a device on
the network.
No OK
Download Downloads device parameters to a device on
the network.
No OK
Parameter
Compare Compare device parameters with the
parameters in a device on the network.
No OK
Monitor Enables monitoring a device on the network
(supported devices only).
No OK
Reset Resets a device on the network. No OK
Maintenance information Displays the maintenance information for the
selected device.
OK OK
Resister to another
component
Registers the current device to the scan list in
another device.
OK OK
Export
Comment list
Exports I/O comments in CSV format
(supported devices only).
OK OK
NX-Server DDE
Setup File Scan list information is output in the
NX-Server DDE Edition file format.
OK OK
NX-Server ONC
Setup File Scan list information is output in the
NX-Server ONC Edition file format.
OK OK
ONC DRM Unit
Setup File Scan list information is output in the ONC
Master parameter file format.
OK OK
Cut Cuts the selected device. OK No
Copy Copies the selected device. OK No
Paste Pastes the device on the clipboard. OK No
Delete Deletes the selected device. OK No
Change Node Address Changes the selected device’s node address. OK No
Change Device Comment Changes the selected device’s description
(comment).
OK No
I/O Comment Enables editing I/O comments. OK No
Start with
Settings
Inherited
Starts the associated application while
keeping the PLC model settings. OK OK
Start a
dedicated tool
Start Only Starts the associated application. OK OK
Properties Displays the properties of the device. OK OK