Omron CJ Series, Operation Manual

Page: 348 / 415

7-6 Editing Master Unit Parameters
7-6-3 Editing the Software Setting Table
7-27
5. Select the
Edit the Registration Table Check Box on the General Tab Page.
The Registration Table Tab Page will be displayed.
6. Set the memory area, first address, and number of nodes for each area.
The start location is specified by setting the CPU Unit memory area and the
address of the first word. The number of nodes to which to allocate words is
specified to give the size of the area.
Area
CPU Unit
memory
area
Address
(allocated start address
for each area)
Number of nodes
(number of node addresses to
which to allocate memory)
Word OUT 64 max.
Word IN 64 max.
Bit OUT 128 max.
Bit IN
CIO, DM,
WR, or HR
Area User-set address. Set for
each area.
128 max.
The allocated start location for the status is as follows:
Participation and
Communications
Error Flags
CPU Unit
memory
area
Address
(allocated start address
for each area)
Allocated contents
Word Slave Status Word slave status
(1 word), Setting
parameter (1 word),
Participation Flags, and
Communications Error
Flags (16 words)
Bit Slave Status
CIO, DM,
WR, or HR
Area User-set address. Set for
each area.
Bit Slave Participation
Flags and
Communications Error
Flags (32 words)
7. Click the Apply Button. The settings will be saved.
8. Click the Transfer [PC to Unit] Button on the General Tab Page for the Master
Unit. The settings will be downloaded to the Master Unit.