Omron CJ Series, Operation Manual

Page: 161 / 415

3-1 Routing Table Overview
3-1-6 Operating Procedures Prior to Routing Table Transfer
3-8
Network Configuration Procedures
Creating the FINS Local Routing Tables Online
Create the FINS local routing tables (in the PLC routing tables).
Create the local network table.
Create the relay network table.
Save the created routing tables.
Select
File – Save Local Routing Table File
from the PLC routing table menu.
Check the routing tables for errors.
Select Options – Check Routing Table for errors from the PLC routing table menu.
Select the type of routing table. (Select FINS local.)
Select FINS Local from the Network Settings Dialog Box.
Start the Routing Table Component. (Start the PLC routing table.)
Right-click the Communications Unit or Port in the Online Connection Information Window select Start Routing Table from the
popup menu, or select Tools - Start Routing Table from the CX-Integrator's menu bar.
Connect online with the PLC directly connected to the CX-Integrator.
Select Network – Auto Online or Network – Work Online from the CX-Integrator's menu bar.
Read the saved routing tables.
Select File – Open Local Routing Table File from the PLC routing table menu.
Set the gateway counter. (CS/CJ-series CPU Units must be unit version 3.0 or later.)
Click the SIOU Tab when the PLC routing tables are displayed, right-click the local PLC's icon, and select Set Gateway
Counter from the menu.
]
Start the Routing Table Component. (Start the PLC routing table.)
Select Tools – Start Routing Table from the CX-Integrator's menu bar, and select Start Routing Table ,
or right-click the Communications Unit in the Online Connection Information Window.
Update the display in the Online Connection Information Window.
In the Online Connection Information Window, select View – Update of Online Information Window .
Transfer the routing tables to the PLC (from the computer to the directly connected PLC).
Select Options – Transfer to PLC from the PLC routing table menu.
Select the destination network and node.
In the Connecting PLC Change Dialog Box, select the Communications
Unit that connects to the network and the node address.
Transferring to a PLC with a direct serial connection
Transferring to a node in the network through the directly
connected PLC.