Omron CJ Series, Operation Manual

Page: 99 / 415

2-1 Basic Procedures
2-8
Reading Saved Parameters and Downloading Them Online to DeviceNet,
CompoNet, or CompoWay/F Components
All of the component parameters on a network can be downloaded to the actual
components from a previously saved project file (.cin) after the network has been
installed. Parameters can also be downloaded for individual components.
Overall Procedure
Start the CX-Integrator.
Download parameters to the network or
to individual components.
Read project file.
Connect online to the relay PLC (= target PLC).
Select File
−
Open from the menu bar.
Select Network
−
Transfer [PC to Network] or
Component
−
Download from the menu bar.
Connect to a Communications Unit/port to enable
accessing it.
Right-click the desired network in the Online
Connection Information Window and select
Connect from the pop-up menu.
Create the local network table.
Transfer the local network table to the relay
PLC via the serial connection.
Select Tools - Start Routing Table from the
menu bar.
Create the local network table and select
Option
−
Transfer to PLC .
Required when there
is more than one
Network
Communications Unit
in the relay PLC
(= target PLC).