Omron CJ Series, Operation Manual

Page: 27 / 415

5 Guide to Version Upgrades
xxvii
Item Previous (Ver. 2.0) Ver. 2.1
Maximum number of send words
per node in a Controller Link
data link 1,000 words max.
4,000 words max.
(The CS1W-CLK13, CS1W-CLK23,
CJ1W-CLK23, and CS1W-CLK53
Controller Link Units support this
feature.)
Number of entries registered in
the relay network table
(Number of destination network,
relay network, and relay node
combinations)
20 entries max.
64 entries max. (An expansion mode
for the number of relay networks is
available.)
(This feature is supported only for
CS/CJ-series CPU Units with unit
version 4.0 or later.)
Display of the transferred
(network to PC) CompoWay/F
network address No
Yes
(When a network address is allocated
to the CompoWay/F network
transferred to the PC, that network
address will be displayed.)
The following table shows the changes in the upgrade from CX-Integrator
Ver. 1.1 to Ver. 2.0.
Item Previous (Ver. 1.1) Ver. 2.0
System overview showing
network configuration
relationships Not supported. A System Overview Window
displays the relationships between
different networks. You can
understand the relationships
between networks on one display.
Also, you can easily switch
between the System Overview and
the Network View.
Registering networks and
components Entered in dialog box for each
setting. A Wizard can be used to enter
settings. You can also return to the
previous setting to correct it.
Workspace Window Only networks are listed. Components and networks are
listed.
Property Window Not supported. The properties of the selected
component or network are
displayed.
Data link mode
(automatic/manual) confirmation
when transferring Controller Link
data link tables Not supported. (The Data Link
Specification in the software
switched in allocated DM Area
words does not change.) When transferring Controller Link
data link tables, the data link mode
(automatic or manual) can be
checked for all the nodes on the
network.
After confirmation, the data link
modes for all nodes can be
changed to user-set data links.
Combining PLCs between
networks When more than one network
is uploaded by connecting to
different PLCs, the Network
Configuration Windows
sometimes have the same
PLC registered as two
separate PLCs. If the same PLC is registered
separately, the PLCs can be
combined as the same PLC in the
Network Configuration Window.