manualshive.com logo in svg

Omron CJ Series, Operation Manual

Share
Download
Omron CJ Series Operation Manual Download Page 68

1-5 Window 

Descriptions

 

1-5-2 Main 

Window

 

1-40 

 

 

 

2.  The following dialog box will be displayed for confirmation. To execute the 

update, click the 

Yes

 Button. 

 

3.  The display contents of the Online Connection Information Window will be 

updated. 

4.  After the display has been updated, operations can be executed with respect to 

the Units and Components that are displayed. 

Precautions for Online Operations After a Routing Table has been Changed or 

Removed 

After a routing table has been changed or removed, observe the following precautions 
regarding the windows from which to execute online operations such as connections, 
network transfers, and starting of special applications.   

1. 

Executing online operations in the Network Configuration Window:

 

The actual network status may be different from what is being displayed in the 
Online Connection Information Window. Be sure to select 

Display – Change 

Online Connection Information Window

 and update the Online Connection 

Information Window. 

2. 

Executing online operations except for “connect” (see note) in a window 
other than the Network Configuration Window:

 

A dialog box will be displayed to notify of a display update. Click the 

OK

 Button 

to update the Online Connection Information Window display. Then execute 
the online operation again. 

Note:

 

When the “connect” operation is executed, the connection is made after the 
Online Connection Information Window display has been automatically 
updated, without any dialog box displayed for updating the window display. 

Summary of Contents for CJ Series
































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands