01/12 Rev. 5.07-01
USER MANUAL
Setup
AP 5.4 – AP 5.6
11
Inserting Ribbon
[18] Grip (A) at the front hood.
Ribbon only has to be inserted for thermal
transfer printing.
WARNING!
Danger of crushing fingers when closing the front hood.
Always use the grip to open or close the front hood.
Danger of rotating parts drawing items in.
Don´t wear
loose
long hair (if necessary, wear a hairnet).
Keep loose jewellery, long sleeves, etc. away from rotating parts of the printer.
Always close the front hood before printing.
During operation, the printhead can become hot!
Be careful whenever touching the printer.
CAUTION!
Poor printing quality.
The thermal transfer ribbon must overlap the label width 2 mm on each side
(ribbon width = label width + 2 mm)
a
.
a) Exception: The label material width exceeds the printhead width. In this case, ribbon must not be wider as the printhead (= max. ribbon
width).
A
