06/15 Rev. 6.00-02
USER- / SERVICE MANUAL
Info-Printouts & Parameters
AP 5.4 Gen II – AP 5.6
17
PRINT INFO
A material width of 100 mm is necessary to print the reports. The status print-
out is approx. 200 mm long.
Printer status
AP 5.4
AP 5.6
A protocol can be printed to get an overview of customer-specific parameter
settings, see [1].
Which parameters are listed, depends on the printer type.
[1] Example of printout „Printer status“.
Listed items:
•
System version:
– Shows the installed firmware version as well as the release date of this
version.
– Firmware version: R = firmware RISC processor, H = firmware
H8 processor.
•
Printer type:
– Shows the printer type, which has been set using parameter
SERVICE FUNCTIONS > printer type
(e.g. AP 5.4)
– "USA" displayed after the printer type indicates that the USA font is loaded.
– "8DOT" displayed after the printer type indicates that the 8-Dot emulation
is loaded.
