06/15 Rev. 6.00-02
USER- / SERVICE MANUAL
Info-Printouts & Parameters
AP 5.4 Gen II – AP 5.6
100
Rewinder adjust
AP 5.4
AP 5.6
AP 5.4Only with „Rewinder 2000“ installed.
Setting up the rewinder.
The rewinder setup compensates differeces in characteristic or assembly of
the light barrier.
This parameter counts for both, the external
rewinder option
for AP 5.4
and the
backing paper rewinder
of the ALX 92x. But mind that the setting
values are different!
A setting description for the
rewinder option
is given in the „Manual Rewinder
2000“, paragraph
Adjusting the sensor
.
Resting pos.xxx
Setup of the resting position (xxx = actual sensor value).
End pos. xxx
Setup of the End position (xxx = actual sensor value).
The setting follows in both cases this scheme:
1. Bring the dancer arm to its resting position.
2. Press the cut button
Not
the Online button (as with TTX x50)!
3. Bring the dancer arm to its end position.
4. Press the Online button.
