05/11 Rev. 6.01-01
USER / SERVICE MANUAL
Technical Data
AP 5.4 – AP 5.6
5
Modifying Fonts
• Up to factor 8 scaling in x/y direction
• Rotation by 0, 90, 180 and 270 degrees
Impression accuracy
[3] The impression accuracy depends on the print position on the label: the longer the distance to the gap
is, the lower is the impression accuracy. The maximum impression accuracy is at the gap position with
+/- 1 mm.
Reading examples:
A: Print positioin 1 is located 50 mm behind the gap position. The maximum possible
deflection from the theoretical print position is +/- 1.5 mm.
B: Print positioin 1 is located 250 mm behind the gap position. The maximum possible
deflection from the theoretical print position is +/- 3.5 mm.
Those values are empirical for typical applications with common label stock / foil
combinations. Since the deflection of the print position strongly depends on the ap-
plied label stock / foil combination, it can turn out higher if unfavorable combinations
are used.
A
A
B
B
