06/15 Rev. 6.00-02
USER- / SERVICE MANUAL
Info-Printouts & Parameters
AP 5.4 Gen II – AP 5.6
32
Raised
First and last digit of the UPCA or first digit with the UPCE are raised (default
setting).
In line
All digits in the decoded line are in line under the code.
EAN Readline
AP 5.4
AP 5.6
<> Signs
Readline enclosed in "<>" signs or terminated by a ">"-Sign (EAN 13).
Standard
Readline without "<>" or ">" signs (default).
EAN sep. lines
AP 5.4
AP 5.6
EAN separation lines. Parameter for controlling of EAN or UPC barcodes if
they are printed without readline.
With readl. only
(Default) The separation bars at the beginning, middle, and the end of the
barcode are only long, if the barcode is printed with a readline.
Always long
The separation bars at the beginning, middle, and the end of the barcode are
always long, regardless if the barcode is printed with or without readline. The
position of the barcode is the same as with the readline option switched on.
Dispense Mode
AP 5.4
AP 5.6
Governs the run of the print-dispense procedure.
Only if
SYSTEM PARAMETER
> Periph. device
= „Tear-off edge“.
Dispense only
With this setting, the printer can be used as a mere dispenser without pro-
cessing print jobs. Set the material length before you use this function.
See parameter
PRINT PARAMETERS > Material length
.
After calling "Dispense only", the printer restarts; afterwards, the following is
displayed:
The parameters menu can be activated as usual after having switched to the
offline mode by pressing the Online button two times.
Normal 1:1 Mode
•
The printer cannot print on the whole label surface. A stripe at the label
beginning stays unprinted.
•
The label is being dispensed while printing.
•
The output volume is at its maximum level.
The width of the unprintable stripe is calculated as follows:
Distance print line to dispensing edge + Dispense position
(see [4])
Dispense only
Labels 0
0 = Number of dispensed labels.
