06/15 Rev. 6.01-01
USER MANUAL
Commissioning and Operation
AP5.4 – AP5.6
2
Installation
Unpacking the printer
[1] AP 5.4 in the original packaging.
1. Remove all loose objects from the shipping box.
2. Carefully lift the printer out of the box together with the styrofoam packaging.
Have a second person hold the box tightly.
3. Remove the styrofoam and plastic film from the printer.
Store the original packaging for possible shipping at a later date!
4. Place the printer on a flat surface.
To carry the printer, reach below the baseplate at the front and rear.
5. Open the front cover. Remove the foamed shipping lock from the printhead.
6. Check that the shipment is complete, see
Scope of delivery
on page 4.
[2] Shipping lock at the printhead.
CAUTION!
To avoid damage to the printer, observe the following:
Do
not
lift the printer using the plastic components on the front and rear.
To lift the printer, do
not
reach below the front hood.
A
