manualshive.com logo in svg

Novexx AP 5.4 Gen II, User Manual

Share
Download
Novexx AP 5.4 Gen II User Manual Download Page 133

03/13 Rev. 5.08-01

USER MANUAL

Maintenance & Cleaning

AP 4.4 – AP 5.4

General Notice

3

Ordering Spare Parts

The following information is required when ordering spare parts:

Order Specifications

• Model
• Device serial number
• Optional device configuration
• Description and part number of the spare part
• Number of parts required

Note on Cleaning

Frequency of Care

Frequent maintenance and cleaning is required to ensure that the device operates 
safely and provides a high level of performance. The frequency with which mainte-
nance checks are required depends on operating and environmental conditions, the 
length of operation daily, and the print media used.

In particular, the printhead and feed roller need to be checked regularly for paper, 

adhesives and ink residues.

Cleaning Agents

CAUTION! - Using parts that do not meet the manufacturer’s high standards may 
damage the machine.

Only use original spare parts supplied by the manufacturer.

CAUTION!

The printer can be damaged by aggressive cleaning agents.

Do not use any cleaning agent that could damage or destroy the resin surface, 

labelling, display, nameplates, electrical components, etc.

Do not use any cleaning agents that are abrasive or solvent to plastics. Avoid 

acid or alkaline solutions.

Dirty component

Cleaning agent

Order number

Printhead

Printhead Cleaning pen [1A]

Cleaning paper

Ethyl or isopropyl alcohol

95327

5030

Print roller and other rubber 
rollers

Roller cleaner [1B]

98925

Metal deflection axis or 
-guide tube

Cleaning fuel

Label remover

90073

External parts

Common neutral cleaning liquid

[Tab. 1] Recommended cleaning agents.

Summary of Contents for AP 5.4 Gen II

























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands