06/15 Rev. 6.00-02
USER- / SERVICE MANUAL
Info-Printouts & Parameters
AP 5.4 Gen II – AP 5.6
101
Rewinder values
AP 5.4
AP 5.6
AP 5.4Only with „Rewinder 2000“ installed.
Shows the values of the position sensor at the rewinder dancer arm in centre-
and in home position.
•
xxx = Sensor value in home position
•
text = Sensor type (Opto = light barrier; Hall = hall sensor; ???? = no explicit
sensor type)
•
yyy = Sensor value in one of the following positions:
–
Centre position
for 64-xx with „Rewinder 2000“ and for ALX 92x with R04A
rewinder motor output stage (--> 01/2012, recognizable with
SYSTEM
PARAMETER
>MODULE FW VERS. > Rewinder driver
= „V2-T36“)
–
End position
for ALX 92x with M5A rewinder motor output stage (01/2012-
->, recognizable with
SYSTEM PARAMETER
>MODULE FW VERS. > Rewinder driver
=
„V4-T5“)
For detailed information about setting the rewinder dancer arm refer to:
– Rewinder 2000: Technical Manual Rewinder 2000, topic section
„Connection, Setup, Service“, chapter „Adjusting the sensor“
Rewinder values
xxx <------ text -------> yyy
