03/13 Rev. 5.08-01
USER MANUAL
Maintenance and Cleaning
AP 5.4 – AP 5.6
Material guiding: setting the movability
12
Material guiding: setting
the movability
Tools
Torx screwdriver of size 10 (supplied with
printer) [17B]
If the material guiding [16A] shifts during the
printing, the sliding friction has to be increased:
1. Unscrew the cover [17C].
2. Tighten the set screw [17A] in the material
guide to increase the driving force.
3. Check the movability of the material guide.
If necessary, repeat step 2.
4. Reassemble the cover.
Adjusting the friction according to the facto-
ry settings: see service manual, topic section
„Service Mechanics“, chapter „Material trans-
port“,
Adjusting the friction of the material
guide
on page 24.
[16] Adjusting the material guide (A).
[17] Tighten the set screw (A) to increase the driving force.
A
A
B
C
