01/12 Rev. 5.07-01
USER MANUAL
Setup
AP 5.4 – AP 5.6
9
AP 5.4/AP 5.6 with Internal
Rewinder
1. Insert the label material, see
Inserting a
label roll
on page 7.
2. As shown, move the end of the label strip
towards the rewinder [11A] and fasten it to
the clasp [11B].
The short side of the stay bolt fits into the
groove [13A].
3. Choose the direction of rotation for the re-
winder (printout facing inwards or out-
wards): Choose the
REWINDER PARA >
Rewind direction
parameter.
After switching on the printer, the rewinder
slowly rotates in the configured direction until
the material ribbon becomes taut.
The following error message might appear until
the material ribbon is taut.
If this happens, press the Online key (re-
peatedly if necessary) to acknowledge the
message.
Status 5004
Rewinder mat. tear
[11] Material path through an AP 5.6 with internal rewinder.
[12] Fix the label strip on the rewinder.
[13] Insert the clasp with the short side into the groove (A).
A
B
A
A
