06/15 Rev. 6.01-01
USER MANUAL
Commissioning and Operation
AP5.4 – AP5.6
15
Using SD cards
Recommended card type:
Xmore industrial 2 GB (item no. A101465) [10]
[10] Recommended SD card.
Inserting the SD card:
1. Switch off the printer.
2. Insert the SD card into the card slot as shown [11].
The contacts point to the front left side.
Once the card is inserted two-thirds of the way [11A], a mechanical resistance
becomes apparent. Apply a little more force to overcome the resistance, insert the
card until it stops and then release it. The card springs back a little ways towards
its final resting position [11B].
[11] Insert the SD card.
CAUTION!
To prevent malfunctions, observe the following.
Only use SD cards that have been approved by the manufacturer.
Only insert or remove SD cards after the printer has been switched off.
After switching off, do not remove the SD cards until the backlighting on the screen
has gone out.
A
A
B
