06/15 Rev. 6.00-02
USER- / SERVICE MANUAL
Info-Printouts & Parameters
AP 5.4 Gen II – AP 5.6
92
Interpreter data
All data is written into the log file, which the Easy-Plug interpreter reads out
of the reception spooler. Immediate commands are
not
included.
Log files delete
AP 5.4
AP 5.6
Only visible, if a memory card is inserted.
No
(Default setting) No function.
Yes
Deletes all log files on the inserted memory card, which fulfil the following
conditions:
•
Filename matches the scheme „EPxxxxxx.log“
xxxxx = number from 1 to 999999, preceding digits filled with „0“. Example:
„EP000001.log“.
•
Location: folder \LOGFILES on memory card
Those conditions are matched by logfiles, which are automatically generated
by
SPECIAL FUNCTION > EasyPl. file log
.
Data blocks del.
Delete data blocks
AP 5.4
AP 5.6
Only appears, if at least one data block is in the flash memory.
Bxx
(Default setting) After calling the parameter, data block number 01 is
displayed:
„B01“: block number 01
„diagnose inf“: name of the data block, is contained in the data block header.
If the flash memory contains more than one data block:
Press the cut button several times, until the wanted data block appears.
Deleting a data block:
Press the online button.
Press the feed button to change to „yes“.
Press the online button to delete the block.
All
All data blocks contained in the flash memory are deleted.
Data blocks del.
B01 diagnose inf
Data blocks del.
Delete? --> no
