06/15 Rev. 6.00-02
USER- / SERVICE MANUAL
Info-Printouts & Parameters
AP 5.4 Gen II – AP 5.6
41
INTERFACE PARA
Interface parameter
> EASYPLUGINTERPR
Interface
AP 5.4
AP 5.6
This parameter sets the interface, by which the printer will receive data.
Serial Com1
Serial interface Com1.
Only for Ethernet interface (10/100 Base T):
TCP/IP Socket
Print data can be sent to the printer via a TCP/IP socket
LPD Server
Print data can be sent to the printer via the LPR/LPD-protocol
USB
USB interface
Serial Com3
Serial interface Com3.
Only with optional I/O board mounted.
Selection of the type of serial interface is done with parameter
INTERFACE
PARA > >COM
3
PORT > Serial Port Mode
Automatic
All interfaces are enabled to receive data, but
not simultaneously
.
Don´t send data to more than one interface at a time.
Except are interfaces, which are being used by an option (e.g. OLV).
Spooler mode
AP 5.4
AP 5.6
The operating mode of the spooler determines whether print series are pro-
cessed individually, or whether the spooler can receive print data when print-
ing several series.
Single print job
Single print series mode (the interface can only receive data after printing the
required number of labels of a single series)
Mult. print jobs
Multiple print series mode (the interface can receive data while the series is
being printed)
