06/15 Rev. 6.00-02
USER- / SERVICE MANUAL
Info-Printouts & Parameters
AP 5.4 Gen II – AP 5.6
28
Material length
AP 5.4
AP 5.6
The material length (label length) is the distance between the gaps, meas-
ured from the front edge (beginning) of a label to the front edge of the next
label.
The value is overwritten by the appropriate Easy Plug command when
sending label formats.
xxx mm
Setting range: 5 mm to "max. length entry"; Unit interval: 0.1 mm
Default setting: 100 mm
Maximum length entry: dependent on the print head width and memory con-
figuration.
Material width
AP 5.4
AP 5.6
Zero position of the left border. If the printer is working in line-printer mode,
alterations can be made in millimetre units.
xxx mm
Setting range: "min. width" to "max. width"; Unit interval: 0.1 mm
Default setting: 100 mm
•
Min. width: dependent on the printer type
•
Max. width: dependent on print head width and memory configuration.
For detailed material width information, refer to topic section „Specifications“.
