07/15 Rev. 02
USER MANUAL
Options
AP 5.4 – AP 5.6
4
Options
Internal Options
…should be factory-fitted or installed by a service engineer:
•
Reflex Sensor Kit
: Light barrier fitting that apart from the transmission sensor, also
contains a reflex sensor.
•
Label sensor for short labels
. Recommended for label length < 30 mm.
•
Internal rewinder kit
: To retrofit the internal rewinder; contains the rewinder as well
as the driver board and material guide
•
I/O board
: RS- 422/485 interface, signal interface
External Options
…do not require any special alterations to the printer:
•
Cutter
(required printer: AP 5.4/5.6 peripheral)
• AP 5.4 only:
(External) rewinder
for material rolls with 38 mm (1.5”), 75 mm (3”) or
100 mm (4”) cores (required printer: AP 5.4 peripheral)
•
Keyboard
for standalone operation
•
Foot switch
for foot-operated label dispensing
•
Dispensing edge
(required printer: AP 5.4/5.6 „basic“ or „peripheral“ with internal
rewinder)
