manualshive.com logo in svg

Novexx AP 5.4 Gen II, User Manual

Share
Download
Novexx AP 5.4 Gen II User Manual Download Page 186

06/15 Rev. 6.00-02

USER- / SERVICE MANUAL

Info-Printouts & Parameters

AP 5.4 Gen II – AP 5.6

44

Data synch.

AP 5.4

AP 5.6

Data synchronisation at the serial interface.

RTS/CTS

Data synchronisation through hardware

XON/XOFF

Data synchronisation through software

None

Handshake signals are ignored

Frame error

AP 5.4

AP 5.6

Display

(Default) An error message is displayed, if a framing error is detected while 
the printer is receiving serial data.

Ignore

Framing errors will be ignored, no error messages are displayed.

> COM3 PORT

This menu only appears, if the optional I/O board is installed.

Baud rate

AP 5.4

AP 5.6

With mounted and connected I/O board only.

Speed of data transfer using the serial interface.

xxxxxx Baud

Setting range: 2400 to 115200 Baud; Unit interval: 2400/4800/9600/19200/
38400/115200 (default)

No. of data bits

AP 5.4

AP 5.6

With mounted and connected I/O board only.

The number of data bits is always 8.

Parity

AP 5.4

AP 5.6

With mounted and connected I/O board only.

Defines the parity check of serial transmitted data.

The parity bit is for checking data transmission. If the check shows an error, 
a corresponding message is displayed. The setting must be identical at the 
sender and the receiver. Normally transmission is set without a parity bit.

Summary of Contents for AP 5.4 Gen II

























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands