manualshive.com logo in svg

Novexx AP 5.4 Gen II, User Manual

Share
Download
Novexx AP 5.4 Gen II User Manual Download Page 137

03/13 Rev. 5.08-01

USER MANUAL

Maintenance and Cleaning

AP 5.4 – AP 5.6

Printhead

7

Cleaning with cleaning paper

1. Cut a strip of cleaning paper matching the 

printhead width.

2. Insert the cleaning paper [3A] into the print-

er with the rough side facing upwards.

3. Close the pressure lever.

4. Move the cleaning paper back and forth re-

peatedly [3].

Cleaning paper: see chapter 

Cleaning 

Agents

 on page 3.

Cleaning with alcohol

Only use alcohol-based solvents

1 

 when the 

other two cleaning agents are not available!

Moisten a lint-free cloth with alcohol; wipe 

the thermal edge with the cloth.

Allow printhead to dry for several minutes.

CAUTION!

Risk of fire due to a flammable liquid.

Observe the safety instructions on 

the alcohol bottle.

Don´t smoke.

1) For example ethyl or isopropyl alcohol.

[3] Cleaning the thermal edge with cleaning paper (A).

A

Summary of Contents for AP 5.4 Gen II

























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands