06/15 Rev. 6.01-01
USER MANUAL
Commissioning and Operation
AP5.4 – AP5.6
5
Assembly
Housing parts
[5] Assembly of the separately shipped housing parts.
1. Press the cover for the pheripheral connector [5A] into the housing opening, until
it is flush with the housing.
2. Scew the mounting flange cover [5B] onto the mounting flange. Use the screw-
driver that came with the printer.
Baffle plate
[6] Mounting the baffle plate.
The baffle plate [6F] can be mounted instead of the dispensing edge in order to rewind
the printed material inside the printer. Assembling the baffle plate:
1. Remove the tear-off edge [6A]. To do so, turn out the thumb screw [6B].
2. Remove the front side bottom housing part [6C]. To do so, turn out the screw [6D].
3. Turn in the screws [6E] that came with the baffle plate some rotations. Hang the
baffle plate [6F] with the buttonhole openings on the rear side of the plate onto the
screws. Tighten the screws.
Cutter
If you have ordered an AP 5.4/5.6 peripheral with cutter, the cutter will be shipped sep-
arately.
For instructions on how to assemble the cutter, see manual
Cutter 2000
, “Fastening,
Setting Up, Servicing”.
A
B
A
B
C
A
B
D
F
E
