03/13 Rev. 5.08-01
USER MANUAL
Maintenance and Cleaning
AP 5.4 – AP 5.6
Punch Sensor
11
Punch Sensor
During printing the punch sensor can become
contaminated with lint. Large amounts of dirt
can lead to problems with perforation recogni-
tion.
To free the punch sensor from dust and abrad-
ed particles:
1. Remove the cover [14A] gently and swivel
downwards.
2. Remove the sensor arm [15A].
3. Clean the opening [15B] with compressed
air.
The light transmission sensor is situated
in the upper and the lower part of the sensor
arm on a level with the indicator [15C]. The
reflex sensor is situated about 5 mm further
out in the lower part.
CAUTION!
Label sensor can be damaged.
Do
not
use sharp or hard objects or
solvents to clean the label sensors.
[14] Open the cover (A).
[15] Pull out the label sensor fork (A)..
A
A
B
C
