manualshive.com logo in svg

Novexx AP 5.4 Gen II, User Manual

Share
Download
Novexx AP 5.4 Gen II User Manual Download Page 196

06/15 Rev. 6.00-02

USER- / SERVICE MANUAL

Info-Printouts & Parameters

AP 5.4 Gen II – AP 5.6

54

> OPTIONS

RFID Option

AP 5.4

AP 5.6

Off

RFID-Option is 

not

 activated (RFID = Radio Frequency Identification).

Serial Com1

This setting option is not relevant for application of the RFID option.

This setting option is only visible, if Com1 is not activated for any other 

option.

Serial Com4

Com4  is activated for application of the RFID option (Setting for AP 5.4 Gen 
II, AP 5.6).

This setting option is only visible, if Com4 is not activated for any other 

option.

StandAlone Input

AP 5.4

AP 5.6

Defines an interface for data input in standalone mode.

Interfaces are only selectable, if installed and not used by another 

function (e. g. as data interface). If 

INTERFACE PARA >EASYPLUGINTERPR > 

Interface

= „Automatic“, all interfaces besides Com3 are blanked out.

None

No data input via interface.

Serial Com1

Com1 is activated for data input in standalone mode.

Serial Com3

Com3 is activated for data input in standalone mode.

TCP/IP SOCKET

Ethernet interface is activated for data input in standalone mode.

#VW/I Interface

AP 5.4

AP 5.6

Defines the output interface belonging to the Easy-Plug command #VW/I.

Easyplug

(Default) Interface that is defined in 

INTERFACE PARA >EASYPLUGINTERPR > 

Interface

 as input interface for print data.

Serial Com1

Serial interface Com 1.

Only available for selection, if the interface is not occupied by another 

function.

USB

USB interface

Only available for selection, if the interface is not occupied by another 

function.

TCP/IP SOCKET

Ethernet interface

Only available for selection, if the interface is not occupied by another 

function.

Serial Com3

Serial interface Com 3.

Summary of Contents for AP 5.4 Gen II

























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands