05/11 Rev. 6.01-01
USER / SERVICE MANUAL
Technical Data
AP 5.4 – AP 5.6
4
Label sensor
The dark/light change at the reflex sensor is taken as the
label beginning
(= end of
the reflex mark)
[2] Measures and setting range of the punch / reflex mark.
Max. print length
The maximum print length depends on the following:
• Printer type
• Printer resolution
• Firmware version
• Parameter settings regarding memory allocation (e.g.
SYSTEM PARAMETERS > Free
store size
)
Zero line
Offset of the material zero line to the print zero line: 1 mm (what means that a stripe of
1 mm width at the inner label margin is unprintable)
Fonts
• 17 Fixsize fonts , including OCR-A and OCR-B
• 3 scalable fonts (Speedo fonts)
• Truetype fonts are supported
• Optionally can Truetype, Speedo and Fixsize fonts be stored on SD-card
Sensor type
Setting range
(Size c)
Punch length
(Size b)
Punch width
(Size a)
Transmission sensor
(Standard)
0–60 mm
0.8–14 mm
min. 4 mm
Reflex-sensor
(optional)
6–66 mm
4 mm
(recommended)
12 mm
(recommended)
[Tab. 4] Required punch measures.
a
b
c
Z021
1.cdr
Punch / Reflex mark
Punch sensor
Label web
