Mitsubishi Electric F920GOT-BBD-K-E, Hardware Manual

Page: 462 / 592

GOT-F900 SERIES (CONNECTION) Connection of Machine Controller CP9200SH (PLC Manufactured by Yaskawa Electric) 17
17-2
17.2 System Configuration
The MP900/CP9200SH machine controller can be directly connected to the GOT via RS-422 or RS-
232C. This section explains the cables and options required in such a system.
Connectable Model and Connector Shape
The table below shows applicable models and their connector shape.
17.2.1 Configuration for CPU Direct Connection (RS-422)
Connect the MP900/CP9200SH machine controller to the COM port of the MEMOBUS unit and the RS-
422 communication port of the GOT.
The GOT-F900 and the machine controller can be connected on the 1:1 basis.
1) F930GOT/F930GOT-K/F940GOT/F940WGOT
- Applicable machine controller product in the column a) is a MEMOBUS unit equipped with built-in RS-422
interface.
Machine controller GOT
Remarks
Model Unit Port Connector shape
CP9200SH CP-217IF
CN1 RS-232C 9-pin D-Sub, male
CN2 RS-232C 25-pin D-Sub, male
CN3 RS-422 8-pin connector, male
MP920
CPU equipped
with built-in ports
PORT1 RS-232C 9-pin D-Sub, male
PORT2 RS-232C 9-pin D-Sub, male
CP-217IF
CN1 RS-232C 9-pin D-Sub, male
CN2 RS-232C 9-pin D-Sub, male
CN3 RS-422 8-pin connector, male
MP930
CPU equipped
with built-in ports
PORT1 RS-232C 9-pin D-Sub, male
PORT2 RS-232C 9-pin D-Sub, male
a) Machine controller b) RS-422 cable Remarks
CP-217IF
Dedicated 8-pin
connector
Prepared by the user MEMOBUS unit
b) RS-422 cable
F940GOT
F943GOT
F930GOT
GOT-F900
a) Machine controller MEMOBUS unit
CP9200SH,MP920
CP-217IF