Mitsubishi Electric F920GOT-BBD-K-E, Hardware Manual

Page: 534 / 592

GOT-F900 SERIES (CONNECTION) Connection of SIMATIC S7-200/300/400 Series PLC (Manufactured by Siemens AG) 20
20-12
20.7 Setting of Connected Equipment for GOT
The SIMATIC S7-200/300/400 Series PLC connection parameters can be set using the GOT-F900
Series and the screen creation software (GT Designer 2, GT Designer or DU/WIN).
1) GOT-F900 Series
When the main menu screen change operation is disabled.
When the main menu screen change operation is enabled.
- When the screen data is transferred to the GOT-F900, the old data including the PLC type, connection type,
and station number are overwritten.
Operation Display (screen name)
a)While pressing and holding the upper left corner of the screen,
turn on the power. Keep holding the upper left corner for about
25 seconds more.
Then, press "END" at the upper right corner.
The "LANGUAGE" screen appears.
The "SET-UP MODE" screen appears.
b)Press "PLC TYPE".
c) Set the following.
PLC TYPE: SIEMENS S7-200
SIEMENS S7-300
CONNECTION:CPU PORT (RS-232C)
(S7-200)
DST STATION # : 1 to 31
GOT STATION # : 0 to 31
(S7-300)
DST STATION # (STATION #): 02 to 31
("00" and "01" are treated as "02".)
GOT STATION # (
−
) :
−
The "PLC TYPE" screen appears.
Operation Display (screen name)
a)Press the upper left corner of the screen. (The position to be
pressed can be changed in the GOT and the screen creation
software.)
The "SELECT MODE" screen appears.
b)Press "OTHER MODE" on the menu. The "OTHER MODE" screen appears.
c) Press "SET-UP MODE" on the menu. The "SET-UP MODE" screen appears.
d)Press "PLC TYPE".
e)Set the following.
PLC TYPE: SIEMENS S7-200
SIEMENS S7-300
CONNECTION:CPU PORT (RS-232C)
(S7-200)
DST STATION # : 1 to 31
GOT STATION # : 0 to 31
(S7-300)
DST STATION # (STATION #): 02 to 31
("00" and "01" are treated as "02".)
GOT STATION # (
−
) :
−
The "PLC TYPE" screen appears.