Mitsubishi Electric F920GOT-BBD-K-E, Hardware Manual

Page: 366 / 592

GOT-F900 SERIES (CONNECTION) Connection of FREQROL (S500/E500/A500) Inverter 13
13-28
d)Setting the port (RS-422) of the GOT-F900
Click "Auxiliary Setting" in the tree of the system environment
menu.
Click the check box of "Use Serial Port, Setup, Language, Menu
Key" to give a check mark (
$
).
Click "Got Setup" in the tree of the system environment menu.
The "Auxiliary Settings"
dialog box appears.
e)Set the following.
Port : RS-422
Type : CPU
Station No. : 00
GOT Station No. :
−
[Change method] Change the connection type of the already created data as follows.
a)Open GT Designer.
The "Select Project"
dialog box appears.
b)Click the [Project]-[Open] button.
c) Open (read) the screen data to be changed.
d)On the menu, select "Common"-"System Environment".
- For the contents of setting, refer to c) of [Creation] above.
- For selection of the RS-422 on the FREQROL Series inverter,
refer to e) of [Creation] above.
The "System
Environment" dialog box
appears.
Operation Display (screen name)