Mitsubishi Electric F920GOT-BBD-K-E, Hardware Manual

Page: 326 / 592

GOT-F900 SERIES (CONNECTION) Connection of FX Series Positioning Unit (FX(2N)-10/20GM) 12
12-4
12.3 Cautions on use of FX Series positioning unit
When using the GOT-F900 connected to the FX Series positioning unit, observe the following cautions
on use.
12.3.1 Device specification
The device range specifications vary depending on the model of the FX Series positioning unit as shown
in the table below.
*1 Input relays (X) X000 to X377 can be read only.
*2 When a screen is created using the DU/WIN, only V and Z are available as index registers.
12.3.2 Devices which can be monitored
Among bit devices, specify the device number of input relays (X) and output relays (Y) in octal (1, 2, 3 .
. . 7, 10, 11. . . 17, 20). Specify the device number of other bit devices in decimal.
When specifying word devices, use the zero suppression function.
Only devices described in chapter 3.3 can be specified.
12.3.3 Caution on connection of a programming tool to the FX Series positioning unit
When programming the positioning unit, the GOT-F900 should be disconnected from the programming
port of the GMCPU.
(Positioning programs cannot be transferred or monitored from a personal computer connected to the
GOT-F900.)
Device name and Nos. which
can be monitored in GOT
FX
2N
-10GM
FX-10GM
FX
2N
-20GM
FX-20GM
E-20GM
Input relay (X)
*1
X000~X377
X000~X003
X375~X377
X000~X007
X010~X067(when I/Os are extended)
X372~X377
Output relay (Y)
Y0~Y67
Y00~Y05 Y00~Y67
Auxiliary relay (M)
M0~M511
M0~M511 M0~M511
Special auxiliary relay (M)
M9000~M9175
M9000~M9175 M9000~M9175
Data register (D)
D0~D3999
D0~D1999 D0~D3999
File register (D)
D4000~D6999
D4000~D6999 D4000~D6999
Special data register (D)
D9000~D9599
D9000~D9313 D9000~D9599
Index register (V, Z)
*2
V0~V7
Z0~Z7(32 bits)
V0~V7
Z0~Z7(32 bits)
V0~V7
Z0~Z7(32 bits)