Mitsubishi Electric F920GOT-BBD-K-E, Hardware Manual

Page: 156 / 592

GOT-F900 SERIES (CONNECTION) Installation and Wiring of Handy GOT 5
5-54
Caution on setting of "Output Indicator"
1.The contents of "Output Indicator" you have set are not displayed on the screen.
2.The setting of the "Output Indicator" check box is valid only in the F920GOT-K, F930GOT-K and
Handy GOT. Never set it in any other series.
3.Set "Output Indicator" only on the common screen. Even if it is set on a user screen, it does not
function.
4.Make sure that the bit device assigned on the "Output Indicator" dialog box is not included in the bit
device range in set in "View/Project"-"System Settings"-"Interface Devices".
[Switch setting]
Grip switch f) Select "View/Project"-"System Settings"-"Setup Data".
g)The setting varies depending on the version of the screen
software version.
<When the DU/WIN version is 2.50 or later>
<When the DU/WIN version is earlier than 2.50>
h)Click "Use Grip Switch" to give a check mark (
✓
).
When using the grip switch function, give a check mark (
✓
).
When not using the grip switch function, do not give a check mark
(
✓
).
The "Setup Data" dialog
box appears.
Operation Display (screen name)