Mitsubishi Electric F920GOT-BBD-K-E, Hardware Manual

Page: 420 / 592

GOT-F900 SERIES (CONNECTION) Connection of SYSMAC C Series PLC (Manufactured by Omron) 15
15-8
15.3 Communication Specifications for Host Link
With regard to the communication specifications in the SYSMAC C Series PLC, set the command level
to the host link mode, and set the transmission specifications shown below.
Setting the transmission specifications
Set the transmission specifications in the serial communication unit as shown in the table below. For the
switch setting method, refer to the manual of each host link unit.
- The specifications such as the transmission speed are fixed on the GOT-F900 side, and cannot be
changed.
Setting the unit number (station number) setting switches
The unit number is regarded as the station number in the GOT-F900.
The available range varies depending on the OS version as shown in the table below.
Item Set value Remarks
Transmission speed 19200 bps
Data format
Data bit 7bit
Parity bit Provided (even)
Stop bit 2 bits
Command level Host link mode
Procedure 1 : N
GOT-F900 OS version Contents of setting
F920GOT-K(5V) -- --
F920GOT-K(24V) 1.20 or later
Set the value (0 to 31) set in the GOT-F900.
F930GOT 3.00 or later
F930GOT-K 4.60 or later
F940GOT 5.00 or later
F940WGOT 1.00 or later
F940 Handy GOT 5.00 or later
F943 Handy GOT 5.00 or later
Version former than above Set the value (0 to 15) set in the GOT-F900.