Mitsubishi Electric F920GOT-BBD-K-E, Hardware Manual, Page: 404 / 592

GOT-F900 SERIES (CONNECTION) Connection of Microcomputer 14
14-28
Set the transmission specifications consecutively.
↓↓↓↓
Setting the transmission specifications for microcomputer connection
In the case of SW4D5C-GOTR-PACKE earlier than version A,
perform the setting in the GOT-F900.
(Set the connection in "CONNECTION" in the GOT-F900.)
For the setting method, refer to "1) GOT-F900 Series" on the
previous page.
e)Set the following.
Port : RS-422
RS-232C
Type : CPU
DST Station No. (Station No.) : 00 (01 to 31 when two or more
GOTs are connected)
GOT Station No. (
−
) :
−
[Change method] Change the connection type of the already created data as follows.
a)Open GT Designer.
The "Select Project"
dialog box appears.
b)Click the [New] button.
c) Open (read) the screen data to be changed.
d)On the menu, select "Common"-"GOT/PLC Type".
- For the contents of setting, refer to c) of [Creation] above.
- For selection of the RS-422 or the RS-232C on the
Microcomputer, refer to e) of [Creation] above.
The "GOT/PLC Type"
dialog box appears.
Operation Display (screen name)
[Creation] a)On the menu, select "Common"-"Auxiliary Setting"-"Project"-
"Serial Port".
b)Set the transmission specifications set in the microcomputer.
Set "Speed", "Parity", "Data Bit" and "Stop Bit".
(Handshaking not available)
The "Project Auxiliary
Settings" dialog box
appears.
Operation Display (screen name)