Mitsubishi Electric F920GOT-BBD-K-E, Hardware Manual

Page: 118 / 592

GOT-F900 SERIES (CONNECTION) Installation and Wiring of Handy GOT 5
5-16
5.4.2 Wiring between Handy GOT (RH model) operation switches and connected equipment
1) F940 Handy GOT
Connect the cable to
the port inside the
rear cover.
a)
b)
For the details, refer to 5.6.2.
To power supply and
operation switches
a) c)
For the details, refer to 5.6.2.
To power supply and
operation switches
a) d)
To computer link unit,
microcomputer board or
another company's PLC
To power supply and
operation switches
For the details, refer to 5.6.2.
To FX
0
/FX
0S
/FX
1S
/
FX
0N
/FX
1N
/FX
2N
/
FX
2NC
Series PLC
To FX/FX
2C
/A/QnA
Series PLC
For the details, refer to 5.4.3.
Name Model name Remarks
a) External cable
F9GT-RHCAB-3M(3m, 9' 10")
F9GT-RHCAB-6M(6m, 19' 8")
F9GT-RHCAB-10M(10m, 32' 10")
One side: 37-pin D-Sub
Cable outside diameter: 12.2mm(0.48")
b) Relay cable for PLC connection F9GT-RHCAB2-150(1.5m, 4' 11")
For connecting FX Series CPU
PLC side: 8-pin MINI DIN
c) Relay cable for PLC connection F9GT-RHCAB3-150(1.5m, 4' 11")
For connecting FX/A/QnA Series CPU
PLC side: 25-pin D-Sub
d) Relay cable for PLC connection Prepared by user
P O W
E R
G R I P
S W
When connecting via RS-232C ports, make sure that the distance between the Handy GOT and PLC
is 11.5m (37' 9") or less.
CN1(8-pin)
CN2(20-pin)
CN4(5-pin)
CN5(4-pin)
CN6(3-pin)
CN7(2-pin)
CN1:For power supply
CN2:For communication
CN4:For grip switch
CN5:For emergency stop switch
CN6:For keylock switch
CN7:Not to be wired