Mitsubishi Electric F920GOT-BBD-K-E, Hardware Manual

Page: 356 / 592

GOT-F900 SERIES (CONNECTION) Connection of FREQROL (S500/E500/A500) Inverter 13
13-18
13.6 FREQROL Inverter Parameter List
This section describes, for reference, the list of comparison of parameters in the FREQROL Series
inverters S500, E500 and A500.
For the details of each function, refer to the manual of the inverter respectively.
13.6.1 Parameters
The inverter is equipped with the following parameters.
(For the details, make sure to refer to the manual of the inverter.)
Func-
tion
A500 E500 S500
Pr Name Pr Name Pr Name
Basic functions
0 Torque boost 0 Torque boost 0 Torque boost
1 Maximum frequency 1 Maximum frequency 1 Maximum frequency
2 Minimum frequency 2 Minimum frequency 2 Minimum frequency
3 Base frequency 3 Base frequency 3 Base frequency
4 Multi-speed setting (high speed) 4 Multi-speed setting (high speed) 4 Multi-speed setting (high speed)
5 Multi-speed setting (middle speed) 5 Multi-speed setting (middle speed) 5 Multi-speed setting (middle speed)
6 Multi-speed setting (low speed) 6 Multi-speed setting (low speed) 6 Multi-speed setting (low speed)
7 Acceleration time 7 Acceleration time 7 Acceleration time
8 Deceleration time 8 Deceleration time 8 Deceleration time
9 Electronic thermal O/L relay 9 Electronic thermal O/L relay 9 Electronic thermal O/L relay
Standard oper
ation
functions
10 DC injection brake operation frequency 10 DC injection brake operation frequency 10 DC injection brake operation frequency
11 DC injection brake operation time 11 DC injection brake operation time 11 DC injection brake operation time
12 DC injection brake voltage 12 DC injection brake voltage 12 DC injection brake voltage
13 Starting frequency 13 Starting frequency 13 Starting frequency
14 Load pattern selection 14 Load pattern selection 14 Load pattern selection
15 Jog frequency 15 Jog frequency 15 Jog frequency
16 Jog acceleration/deceleration time 16 Jog acceleration/deceleration time 16 Jog acceleration/deceleration time
17 MRS input selection
− −
17 RUN key rotation direction selection
18 High-speed maximum frequency 18 High-speed maximum frequency
− −
19 Base frequency voltage 19 Base frequency voltage 19 Base frequency voltage
20
Acceleration/deceleration reference
frequency
20
Acceleration/deceleration reference
frequency
20
Acceleration/deceleration reference
frequency
21 Acceleration/deceleration time increments 21 Acceleration/deceleration time increments 21 Acceleration/deceleration time increments
22 Stall prevention operation level 22 Stall prevention operation level 22 Stall prevention operation level
23
Stall prevention operation level
compensation factor at double speed
23
Stall prevention operation level
compensation factor at double speed
23
Stall prevention operation level
compensation factor at double speed
24 Multi-speed setting (speed 4) 24 Multi-speed setting (speed 4) 24 Multi-speed setting (speed 4)
25 Multi-speed setting (speed 5) 25 Multi-speed setting (speed 5) 25 Multi-speed setting (speed 5)
26 Multi-speed setting (speed 6) 26 Multi-speed setting (speed 6) 26 Multi-speed setting (speed 6)
27 Multi-speed setting (speed 7) 27 Multi-speed setting (speed 7) 27 Multi-speed setting (speed 7)
28 Multi-speed input compensation
− −
28
Stall prevention operation reduction
starting frequency
29 Acceleration/deceleration pattern 29 Acceleration/deceleration pattern 29 Acceleration/deceleration pattern
30 Regenerative function selection 30 Regenerative function selection 30 Regenerative function selection
31 Frequency jump 1A 31 Frequency jump 1A 31 Frequency jump 1A
32 Frequency jump 1B 32 Frequency jump 1B 32 Frequency jump 1B
33 Frequency jump 2A 33 Frequency jump 2A 33 Frequency jump 2A
34 Frequency jump 2B 34 Frequency jump 2B 34 Frequency jump 2B
35 Frequency jump 3A 35 Frequency jump 3A 35 Frequency jump 3A
36 Frequency jump 3B 36 Frequency jump 3B 36 Frequency jump 3B
37 Speed display 37 Speed display 37 Speed display
− −
38 Frequency at 5V (10V) input 38 Frequency setting voltage gain frequency
− −
39 Frequency at 20mA input 39 Frequency setting current gain frequency
− − − −
40 Start-time ground fault detection selection
Output
ter
m
inal
functions
41 Up-to-frequency sensitivity 41 Up-to-frequency sensitivity 41 Up-to-frequency sensitivity
42 Output frequency detection 42 Output frequency detection 42 Output frequency detection
43
Output frequency detection for reverse
rotation
43
Output frequency detection for reverse
rotation
43
Output frequency detection for reverse
rotation