Mitsubishi Electric F920GOT-BBD-K-E, Hardware Manual

Page: 374 / 592

GOT-F900 SERIES (CONNECTION) Connection of FREQROL (S500/E500/A500) Inverter 13
13-36
"DISPLAY SCREEN
IS NOT AVAILABLE.
(NO. ####)" is
displayed on the GOT-
F900 screen.
The display screen contains an error.
• Causes
A device that does not exist in the connected PLC is
referenced on the screen No. ####, or one of the screen
objects is placed outside the available screen area.
• Countermeasures
Check the devices used and placement of screen objects.
From
first
product
6.00 or
later
4.00 or
later
"DATA IS NOT
FOUND." is displayed
on the GOT-F900
screen.
There is not data because the unit is new or the memory clear
has been executed.
• Cause
There is no screen data.
• Countermeasures
Write the screen data using the screen creation software.
−
Earlier
than
6.00
Earlier
than
4.00
A device that does not exist in the FREQROL inverter was
referenced. (Example: While an S500 Series is connected, a
device exists only in the A500 Series is specified for numeric
input.)
• Cause
On the head screen, a nonexistent device in the connected
FREQROL inverter is specified.
(The head screen is the screen No. 1 in the GT Designer, and
the screen No. 0 in the DU/WIN.)
• Countermeasures
Check the devices used on the head screen.
There is not data because the unit is new or the memory clear
has been executed.
• Cause
There is no screen data.
• Countermeasures
Write the screen data using the screen creation software.
From
first
product
6.00 or
later
4.00 or
later
"CAN NOT WRITE TO
PLC MEMORY." is
displayed on the GOT-
F900 screen.
This error is not displayed.
Earlier
than
1.10
Earlier
than
6.10
Earlier
than
4.10
"CAN NOT WRITE."
is displayed on the
GOT-F900 screen.
A parameter (Pr) in the FREQROL inverter was tried to be
changed.
• Cause
The FREQROL inverter is not set to the computer link
operation mode or the inverter is running.
• Countermeasures
In the manual of the FREQROL inverter, confirm the allowable
write range in each operation mode.
1.10 or
later
6.10 or
later
4.10 or
later
"CAN NOT USE THE
FUNCTION WHILE
PROTECTED." is
displayed on the GOT-
F900 screen.
This error is not displayed.
From
first
product
From
first
product
From
first
product
"PLC IS RUNNING."
is displayed on the
GOT-F900 screen.
This error is not displayed.
From
first
product
From
first
product
From
first
product
Contents of trouble Check points and countermeasures
OS version
F940W F940 F930