Mitsubishi Electric F920GOT-BBD-K-E, Hardware Manual, Page: 98 / 592

GOT-F900 SERIES (CONNECTION) Installation and Wiring of F920GOT-K/F930GOT(-K)/F940(W)GOT 4
4-28
3) GT Designer
Caution on setting of "Lamp (External)"
1. The contents of "Lamp (External)" you have set are not displayed on the screen.
2. The setting of the "Lamp (External)" check box is valid only in the F920GOT-K, F930GOT-K and
Handy GOT. Never set it in any other series.
3. Set only one lamp for all screens of the created screen data.
Operation Display (screen name)
[Setting] a)It is supposed that the GT Designer has started up and the screen
data to be set is read.
b)Open a user screen to be set.
Any screen is available as far as it has been already created.
Select and display the base screen (B-1) in this example.
[LED setting] c) Select "Draw"-"Animation Display"-"Lamp" on the menu.
d)On the "Basic" tab, click "Lamp (External)" to display the check
mark (
$
), click the [Device] button, input a bit device to be
assigned, then click [OK].
Refer to Caution on setting of "Lamp (External)" described later.
The "Lamp" dialog box
appears.
[Switch setting]
Function key e)On the menu, select "Common"-"Operation Panel".
f) Click "Available Operation Panel" to display the check mark (
$
).
Refer to "Function key setting" described later.
"Edit Operation Panel"
dialog box appears.