Mitsubishi Electric F920GOT-BBD-K-E, Hardware Manual

Page: 350 / 592

GOT-F900 SERIES (CONNECTION) Connection of FREQROL (S500/E500/A500) Inverter 13
13-12
13.4.4 Specification of the program operation (PG) devices
When setting the start time (PG10 to PG19, PG40 to PG49, PG70 to PG79), specify the hour or the
minute to the upper 8 bits, and specify the minute or the second to the lower 8 bits.
Example: When setting "13:35"
13.4.5 Caution on setting of the calibration parameters (Pr900 to Pr905)
When setting the calibration parameters (Pr900 to Pr905), the following value should be written to the
second extension parameter (SP108) depending on the used device number and inverter model.
13.4.6 Restriction in simultaneous specification of PG and Pr devices on one screen
When creating a screen of the GOT-F900, specify either program operation (PG) device or parameter
(Pr. 900 to Pr. 905) device. Do not specify both on one screen.
13.4.7 Caution on connecting to the PU port (only in the E500 and the A500)
When the power of the inverter is turned on, the external operation mode is automatically selected.
In order to rewrite values of parameters, etc. in the GOT-F900, changing operation mode to "PU
operation" in advance is required.
To change the operation mode, write "2" to the special parameter SP123.
Time to be specified 13 (hour) 35 (minute) Remarks
Convert the hour and the minute to hexadecimal
number respectively.
H0D H23 Hexadecimal (HEX)
Add the upper bits and the lower bits. Input "H0D23" or "3363".
Value to be written to second extension parameter (SP108) Description
H00 Offset/gain
H01 Analog
H02 Analog value of terminal