Mitsubishi Electric F920GOT-BBD-K-E, Hardware Manual

Page: 557 / 592

GOT-F900 SERIES (CONNECTION) Connection of Bar Code Reader 22
22-3
21
C
o
n
n
e
c
ti
on
of
Pr
in
te
r
22
Co
n
n
e
c
ti
o
n
o
f
Ba
r Co
d
e
R
e
ad
er
23
Ap
p
e
n
d
ix
22.3 Bar Code Reader Communication Setting
The GOT can be connected to a bar code reader which satisfies the transmission specifications and the
communication format shown below.
22.3.1 Transmission Specifications and Communication Format
Set the transmission specifications and the communication format of the bar code reader as shown in
the table below. For the setting method, refer to the manual of the bar code reader.
1) Transmission Specifications
- The transmission specifications and the communication format are fixed on the GOT-F900 side, and
cannot be changed. Align the settings in the bar code reader with the settings in the GOT-F900.
2) Communication Format
Item Set value Remarks
Transmission speed 9600 bps
Data format
Data bit 8 bits
Parity bit Provided (even)
Stop bit 1 bit
Not
provided
Data Data
. . . . .
CR(ODH)
Header ASCII character code End code