Mitsubishi Electric F920GOT-BBD-K-E, Hardware Manual

Page: 428 / 592

GOT-F900 SERIES (CONNECTION) Connection of SYSMAC C Series PLC (Manufactured by Omron) 15
15-16
5) In the case of CPM2C Series (CPU equipped with built-in peripheral port)
In the CPU CPM2C-10CDR-D, write data to the data memory (DM) shown in the table below using a
peripheral tool. In the CPU CPM2C-10CDR-D, set the DIP switch shown below.
The table below explains the data memory (DM) Nos. and set values which should be set using a
peripheral tool.
Setting item Set value Remarks
CPM2C-10CDR-D
DIP switch SW1
OFF
Setting item Port Set value (hexadecimal) Remarks
Communication DM6645 0001H
Communication condition: Set individually
Host link mode
CTS control: Not provided
Transmission speed DM6646 0304H
Baud rate: 19200 bps
Start bit length: 1 bit
Data length: 7 bits
Stop bit length: 2 bits
Parity: Even
Transmission delay time DM6647 0000H Transmission delay time: 0ms
Unit number DM6648 0000 to 0031 Host link unit number (BCD value)
No protocol
communication
DM6649 0000H Default (effective according to no protocol.)