Mitsubishi Electric F920GOT-BBD-K-E, Hardware Manual

Page: 444 / 592

GOT-F900 SERIES (CONNECTION) Connection of FLEX-PC N Series PLC (Manufactured by Fuji Electric) 16
16-2
16.2 System Configuration
The FLEX-PC N Series PLC can be connected to the GOT via RS-422 or RS-232C using a link unit.
This section explains the cables and options required to connect the FLEX-PC N Series PLC.
16.2.1 Configuration for Link Unit Connection (RS-422)
The GOT-F900 and the link unit can be connected on the 1:1 basis.
1) F930GOT/F930GOT-K/F940GOT/F940WGOT
- Applicable FLEX-PC N Series products in the column a) are link units equipped with built-in RS-422
interface.
2) F940 Handy GOT
- Applicable FLEX-PC N Series products in the column a) are link units equipped with built-in RS-422
interface.
a) FLEX-PC N Series b) RS-422 cable Remarks
NB-RS1-AC
Terminal
block
Prepared by the user NJ-RS4
NS-RS1
a) FLEX-PC N Series b) RS-422 cable Remarks
NB-RS1-AC
Terminal
block
(A) F9GT-HCAB-
""
M
NJ-RS4 (B) F9GT-HCNB
NS-RS1 (C) Prepared by the user.
(D) F9GT-HCAB1-
""
M
b) RS-422 cable
F940GOT
F930GOT
GOT-F900
a) FLEX-PC N Series
link unit
GOT-F900
a) FLEX-PC N
Series link unit
Handy GOT
(RS-422)
Use the RS-422
port on the rear
face.
b) RS-422 cable
To power supply
and operation
switches
To RS-422,
power supply
and operation
switches
To RS-422
(A)
(D)
(B)
(C)
Total extension distance: 11.5m (37' 9") or less