Lenovo System x3650 M4 HD Installation And Service Manual Download Page 724

Page: 724 / 1168

Info

Serviceable

Automatically notify support

Alert Category

Warning - Temperature

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0491

User Response

No action; information only.

•

81010701-2d01ffff : Numeric sensor [NumericSensorElementName] going high (upper non-critical)

has deasserted. (PCH Temp)

This message is for the use case when an implementation has detected an Upper Non-critical sensor
going high has deasserted.

May also be shown as 810107012d01ffff or 0x810107012d01ffff

Severity

Info

Serviceable

Automatically notify support

Alert Category

Warning - Temperature

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0491

User Response

No action; information only.

•

81010901-0701ffff : Numeric sensor [NumericSensorElementName] going high (upper critical) has

deasserted. (ROMB Temp)

This message is for the use case when an implementation has detected an Upper Critical sensor going
high has deasserted.

May also be shown as 810109010701ffff or 0x810109010701ffff

712

Lenovo System x3650 M4 HD Installation and Service Guide

Summary of Contents for System x3650 M4 HD

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for System x3650 M4 HD

Reviews:

Brands by name

Popular brands

Lenovo System x3650 M4 HD, Installation And Service Manual

Search results

Summary of Contents for System x3650 M4 HD

Reviews:

Brands by name

Popular brands