Lenovo System x3650 M4 HD, Installation And Service Manual

Page: 31 / 1168

• USB connectors (optional): Connect a USB device, such as a USB mouse or keyboard to any of these
connectors.
Video and USB breakout cable
Use this information for details about the video and USB breakout cable.
Use the video and USB breakout cable to connect external I/O devices to the server. The video and USB
breakout cable connects through the video and USB breakout connector (see “Front view” on page 17). The
video and USB breakout cable has connectors for a display device (video) and two USB connectors for
a USB keyboard and mouse.
The following illustration shows the connectors and components on the video and USB breakout cable.
To video and USB connector
Captive screws
USB ports (2)
Video connector (blue)
Figure 8. Video and USB breakout cable
Operator information panel
The following illustration shows the controls and LEDs on the operator information panel.
1 2 3 4
Ethernet activity LEDs
Check log LED
Locator button/
locator LED
Power-control button/
power-on LED
Ethernet icon System-error LED
Reset button
Figure 9. Operator information panel
• Power-control button and power-on LED: Press this button to turn the server on and off manually.
The states of the power-on LED are as follows:
Off: Power is not present or the power supply, or the LED itself has failed.
Flashing rapidly (4 times per second): The server is turned off and is not ready to be turned on. The
power-control button is disabled. This will last approximately 5 to 10 seconds.
Chapter 1
.
The Lenovo System x3650 M4 HD Type 5460 server
19