Lenovo System x3650 M4 HD Installation And Service Manual Download Page 419

Page: 419 / 1168

CIM Information

Prefix:

PLAT

ID:

0498

User Response

1. Make sure the air baffles/heat sink are placed and correctly installed; and make sure the node

cover is installed and completely closed.

2. Make sure the fans are operating, and there are no obstructions to the airflow.

3. Reduce the Ambient temperature. The system must be operating within the specifications.(see

Features and specifications for more information)

•

80010b01-1405ffff : Numeric sensor [NumericSensorElementName] going high (upper

non-recoverable) has asserted. (DIMM EF VR Temp)

This message is for the use case when an implementation has detected an Upper Non-recoverable
sensor going high has asserted.

May also be shown as 80010b011405ffff or 0x80010b011405ffff

Severity

Error

Serviceable

Yes

Automatically notify support

Alert Category

Critical - Temperature

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0498

User Response

1. Make sure the air baffles/heat sink are placed and correctly installed; and make sure the node

cover is installed and completely closed.

2. Make sure the fans are operating, and there are no obstructions to the airflow.

3. Reduce the Ambient temperature. The system must be operating within the specifications.(see

Features and specifications for more information)

•

80010b01-1406ffff : Numeric sensor [NumericSensorElementName] going high (upper

non-recoverable) has asserted. (DIMM GH VR Temp)

This message is for the use case when an implementation has detected an Upper Non-recoverable
sensor going high has asserted.

May also be shown as 80010b011406ffff or 0x80010b011406ffff

Appendix A. Integrated management module II (IMM2) error messages

407

Summary of Contents for System x3650 M4 HD

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for System x3650 M4 HD

Reviews:

Brands by name

Popular brands

Lenovo System x3650 M4 HD, Installation And Service Manual

Search results

Summary of Contents for System x3650 M4 HD

Reviews:

Brands by name

Popular brands