Lenovo System x3650 M4 HD Installation And Service Manual Download Page 325

Page: 325 / 1168

•

40000001-00000000 : Management Controller [arg1] Network Initialization Complete.

This message is for the use case where a Management Controller network has completed initialization.

May also be shown as 4000000100000000 or 0x4000000100000000

Severity

Info

Serviceable

Automatically notify support

Alert Category

System - IMM Network event

SNMP Trap ID

CIM Information

Prefix:

IMM

ID:

0001

User Response

Information only; no action is required.

•

40000002-00000000 : Certificate Authority [arg1] has detected a [arg2] Certificate Error.

This message is for the use case when there is an error with an SSL Server, SSL Client, or SSL Trusted CA
Certificate.

May also be shown as 4000000200000000 or 0x4000000200000000

Severity

Error

Serviceable

Automatically notify support

Alert Category

System - SSL certification

SNMP Trap ID

CIM Information

Prefix:

IMM

ID:

0002

User Response

Make sure that the certificate that you are importing is correct and properly generated.

•

40000003-00000000 : Ethernet Data Rate modified from [arg1] to [arg2] by user [arg3].

Appendix A. Integrated management module II (IMM2) error messages

313

Summary of Contents for System x3650 M4 HD

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for System x3650 M4 HD

Reviews:

Brands by name

Popular brands

Lenovo System x3650 M4 HD, Installation And Service Manual

Search results

Summary of Contents for System x3650 M4 HD

Reviews:

Brands by name

Popular brands